- Temps to 275°F (135°C)
- Construction: PP, PVC, PVDF, ECTFE
NOTE: Flows and dynamic head pressures of CGV pump heads are dependent on characteristics of the fluid being handled. Please consult factory regarding your application.
CHEM-GARD® CG, CGA and CGC models are offered with vortex pump heads for clog-free pumping of slurries containing solids to 2 in. (51 mm) in diameter, as well as liquids containing stringy materials.
Vortex impellers are recessed, dynamically balanced, and custom sized and trimmed to suit the shapes, dimensions and physical properties of included solids.
|
 |
Impellers, casings and all other fluid contact components are injection molded of solid, homogeneous polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF) or ethylene chlorotrifluoroethylene (ECTFE)- chemically inert thermoplastics that eliminate corrosion of the pump and contamination of the fluid.
The wet end is comprised of solid, thick-sectioned, stand-alone components (unlike plastic linings), that are easily replaced, maximizing uptime while minimizing cost. |
